
DryBox SG
AIRDRY Closet Dehumidifier Built in HygroGuard 3-in-1
AIRDRY HygroGuard- Drying / Sterilization / Deodorization
AIRDRY HygroGuard is directly installed inside the cabinet, offering easy installation and bidirectional airflow- cool air on the left and warm air on the right. Three- dimensional circulation system ensures even distribution of ozone gas throughout the space for comprehensive sterilization. This advanced system effectively eliminates stubborn bacteria and fungi with sterilization rate up to 99% while operating with ultra low energy consumption.
Optimal Placement for Maximum Performance
For best results, the HygroGuard should be positioned at the lower section of the cabinet. Since cool, moist air naturally settles downward, placing the unit at the base allows it to intercept and treat humidity at its point of accumulation before it rises and permeates the rest of the space. This lower placement also maximizes the efficiency of the bidirectional airflow system — drawing in the heaviest, most moisture-laden air first, then circulating purified, conditioned air upward through the full height of the cabinet. The result is a consistently dry, sterilized environment from bottom to top, with no dead zones where bacteria or fungi can take hold.
|
Brand |
AIRDRY |
|
Model |
ADHG6-SD |
|
Control Module Size |
280 x 140 x 43 mm |
|
Display Size |
312 x 55 mm |
|
Input voltage |
110-240v-50/60Hz 3 pin UK safety mark plug (no driver required) - require continuous power from a regular 13amp 3 pin socket. |
|
UV sterilization power |
5W |
|
Heating power |
170W |
|
Ozone generation |
100mg/h |
|
Negative Ion Output |
500W |
|
Temperature range |
20-50°C |
|
Coverage area |
3-10m³ |
|
Warranty |
2 years against manufacturing defects and material failure under normal use |
AIRDRY Closet Dehumidifier Built in HygroGuard 3-in-1
AIRDRY HygroGuard- Drying / Sterilization / Deodorization
AIRDRY HygroGuard is directly installed inside the cabinet, offering easy installation and bidirectional airflow- cool air on the left and warm air on the right. Three- dimensional circulation system ensures even distribution of ozone gas throughout the space for comprehensive sterilization. This advanced system effectively eliminates stubborn bacteria and fungi with sterilization rate up to 99% while operating with ultra low energy consumption.
Optimal Placement for Maximum Performance
For best results, the HygroGuard should be positioned at the lower section of the cabinet. Since cool, moist air naturally settles downward, placing the unit at the base allows it to intercept and treat humidity at its point of accumulation before it rises and permeates the rest of the space. This lower placement also maximizes the efficiency of the bidirectional airflow system — drawing in the heaviest, most moisture-laden air first, then circulating purified, conditioned air upward through the full height of the cabinet. The result is a consistently dry, sterilized environment from bottom to top, with no dead zones where bacteria or fungi can take hold.
|
Brand |
AIRDRY |
|
Model |
ADHG6-SD |
|
Control Module Size |
280 x 140 x 43 mm |
|
Display Size |
312 x 55 mm |
|
Input voltage |
110-240v-50/60Hz 3 pin UK safety mark plug (no driver required) - require continuous power from a regular 13amp 3 pin socket. |
|
UV sterilization power |
5W |
|
Heating power |
170W |
|
Ozone generation |
100mg/h |
|
Negative Ion Output |
500W |
|
Temperature range |
20-50°C |
|
Coverage area |
3-10m³ |
|
Warranty |
2 years against manufacturing defects and material failure under normal use |
